[ultimate_icon_list icon_margin=”0″][ultimate_icon_list_item icon=”Defaults-check” icon_color=”#18660d”]
Will still work with overdrilled holes giving enhanced tolerance and workability.
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-check” icon_color=”#18660d”]Integral spikes guarantee no turning and a tight joint every time.
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-check” icon_color=”#18660d”]Cannot be pulled into timber avoiding any surface damage.
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-check” icon_color=”#18660d”]Fixing requires only one hand and one tool.
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-check” icon_color=”#18660d”]No countersinking required before finishing materials are applied.
[/ultimate_icon_list_item][/ultimate_icon_list][ultimate_icon_list icon_margin=”40″][ultimate_icon_list_item icon=”Defaults-close remove times” icon_color=”#f70000″]
Drilled holes must all be correct size and line up so little of no tolerance.
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-close remove times” icon_color=”#f70000″]Usually turn within the timber so joints not completely tight.
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-close remove times” icon_color=”#f70000″]Heads can pull into the timber damaging the timber face.
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-close remove times” icon_color=”#f70000″]Fixing requires two hands every time.
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-close remove times” icon_color=”#f70000″]
Countersinking required when using finishing materials.
[/ultimate_icon_list_item][/ultimate_icon_list]
[ultimate_icon_list][ultimate_icon_list_item icon=”Defaults-check” icon_color=”#18660d”]
Task specific sizes cover ALL onsite requirements with no wastage.
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-check” icon_color=”#18660d”]Quick and easy to use single piece engineered fixing.
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-check” icon_color=”#18660d”]Requires only one nut and one washer to fix.
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-check” icon_color=”#18660d”]The spikes prevent it from turning, loosening or falling out during fixing.
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-check” icon_color=”#18660d”]Requires access from one side only.
[/ultimate_icon_list_item][/ultimate_icon_list][ultimate_icon_list][ultimate_icon_list_item icon=”Defaults-close remove times” icon_color=”#f70000″]
Pre-set rod lengths generate excessive wastage.
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-close remove times” icon_color=”#f70000″]Requires cutting which damages threads so difficult to affix nuts.
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-close remove times” icon_color=”#f70000″]Requires two sets of nuts and washers to fix.
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-close remove times” icon_color=”#f70000″]Two spanners required to avoid loosening and unwind the second nut
[/ultimate_icon_list_item][ultimate_icon_list_item icon=”Defaults-close remove times” icon_color=”#f70000″]Access is required from both sides – difficult on floors, rafters, ceiling joists etc.
[/ultimate_icon_list_item][/ultimate_icon_list]Task specific Range covers all major joint requirements.
Use standard square washer & nut for timber or round washer & nut for metal.
Connects a single timber into structural steel eg. single sided cladding on floor joist or door lintel.
Connects two timber members together eg. floor joists, rafters, stud walls.
Connects two timbers each side of structural steel e.g. floor beams and door lintels.
Connects three timbers together with or without structural steel e.g. floor joists, rafters and stud walls.
Connects four timbers together with or without structural steel e.g. floor joists and rafter
Architects/Surveyor/Building Control Officer
Tolerance and flexibility are prerequisites of the modern day construction industry. Joints secured with traditional coach bolts or threaded rods cannot guarantee either, particularly over time. Joyner Bolt provides both.
Specifying or recommending the use of Joyner Bolts for the fixing on timbers on site therefore eliminates any doubt about the quality and long term performance of any joints for which they’re used – even those in difficult or hard to reach places.
In addition, Joyner Bolts are simple and quick to use by anyone on site and provide a quality finish which is immediately ready for decorative finishes without further work
To watch Joyner Bolt in action click on to our video
Owner/Builders
Having worked closely with many independent building companies we fully appreciate the demands placed upon the owner/manager and the need for optimum onsite performance.
Joyner Bolt has been proven to save time and money even on small to medium projects. And its built-in benefits of ease of use, flexibility and guaranteed performance quality make it a popular choice on site when fixing timber to timber or metal.
To watch Joyner Bolt in action click on to our video
Buyers
We understand that the responsibility of the buyer is to ensure that the economics of any project are as efficient as possible whilst meeting standards laid down by Building Regs.
Joyner Bolt has been proven to save both time and money without compromising quality or safety due their speed and ease of use, their zero wastage levels and their guarantee of no rework requirement from building control.
To watch Joyner Bolt in action click on to our video
Carpenters/Tradesmen
On site, tradesmen have the task of using materials which have been selected and purchased by others. This can often mean that whilst cost and budget targets are satisfied, some of the generic products or materials provided may be difficult to use, take longer and sometimes even compromise quality standards.
Joyner Bolt was designed to meet the needs of onsite personnel as well as satisfy cost and performance criteria of offsite parties. Offering greater speed and flexibility than traditional coach bolts or threaded rods Joyner Bolts deliver a guaranteed joint every time regardless of difficult onsite conditions like weather and space constraints.
To watch Joyner Bolt in action click on to our video
Contact us here
